Wireless Dimming System with IR Communication
System LED is combined sensor and tiny computer inside to operate by specific time and place when it needs light. So it can reduce energy very much. The easiest, most economic and simple way to set up auto dimming LED system in the world.
3 Key Technology for SMART LED SYSTEM
Minimized multi-funtion IR Network System operated by GMG Smart IR technology.
It doesn’t occur frequency interference problem and no need to frequency assignment authority (RF : 440-2.4GHz, Zigbee : 2.4GHz)
*GMG SMART IR System
( Network + Sensor + LED operating IC )
Optimized S/W Algorithm applied PIR/Digital Light Sensor
High-end PIR was integrated our Smart LED system to meet various factors for this system such as AI operation, Environment, Miniature size, economic cost, etc.,
Why don't we use Microwave/CDS sensor ?
> Because it is caused various problems.
; Frequency Interference Problem
; Communication Latency due to data traffic
; Complicated for Set-up (Input each ID to the system)
; Expensive system budget
Very Simple & Economical Solution
> Just set up with bundled IR remote controller.
> It doesn’t require to install extra device for detecting and telecommunication.
> PIR sensor is detecting object’s movement precisely and instantly.
> Dimming solution save the energy more than 80%
(Fast ROI to normal LED System)
We have studied one of our references called Garden5 which is popular multiplex mall in Korea.
Client wanted to change existing fluorescent system to Smart LED System underground parking lot for more economic and efficient operation, and we have found quite impressed result after install SMART LED System there.
*Images Courtesy Samoo Architects & Engineers
Efficient Rate of Lighting
Fluorescent has been changed to LED lighting
⇒ 32W → 18W (44% Save)
2. Digital Dimming Save Rate
⇒ 18W → 7.8W (56.9% Save)
3. Max. Saving Rate
⇒ 32W → 7.8W (75.6% SAVE)
*Data resource from Garden5